FR-6: Freewheel Remover - BMX & Single Speed brakes this material offers full waterproofing

this material offers full waterproofing

all-black design

You can easily open the bag one handed by pulling outward on the cord loop and you have access to the whole top of the bag

Second set of mounting holes spaced at 100 mm (+/- 2 mm) from the front of the bag

4mm diameter tool fittings - the most common tool fitting found on 7-12 speed cassette lockrings

FR-6: Freewheel Remover - BMX & Single Speed brakes this material offers full waterproofingHeat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Removes four notch BMX single speed freewheel from hubs with 1. 37 x 24 TPI threads The FR 6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always use a skewer or axle nut to hold tool firmly in place during removal